|
Model |
STC- 650 |
STC-1080A |
|
Max paper size(mm) |
650*650 | 1080*650 |
|
Min paper size(mm) |
100*100 |
100*100 |
|
Max window size(mm) |
380*450 |
780*450 |
|
Min window size(mm) |
40*60 |
40*40 |
|
Cardboard (g/㎡) |
200-1000 |
200-1000 |
|
Corrugated paper(mm) |
≤4.0 |
≤4.0 |
|
Film thickness(mm) |
0.05-0.25 |
0.05-0.25mm |
|
Max working speed(s/h) |
10000 |
10000 |
|
Total power (kw) |
8 |
10 |
|
Total weight (T) |
2 |
3 |
|
Dimension |
4750*1550*1600 |
4958*1960*1600 |
1.Feeder:
◆ The unique supporting plate and wheel feeding type replaces the servo intermittent feeding type.
◆ Ensure that the paper is smooth
◆ Deliver the paper with high speed,stable and reliable.
◆ Our company has won the national patent for this part.
2. Rotation rubber roller(can pull-out):
◆ Single rubber roller cooperate with baffle to gluing.
◆ Avoid the waste of glue,reduce the volatilization.
◆ When the machine stopped,the rubber roller can rotation driving by the motor. Avoid the glue solidify on the face of rubber roller.
◆ When cleaning the rubber roller, this part can pull-out entirely,reduce cleaning time.
3. Gluing:
◆ Use automatic gluing instead of hand movement.
◆ This part can adjust the glue roller right or left、up or down.
◆ When the photoelectric sensor reacted the paper. If there are papers pass,the machine will use the air cylinder to control platform to uplift.
◆ If there are no papers pass,the platform will decline.
◆ Avoid the glue smear on the belt.
4. Suction belt:
◆ The two suction belts are wide and thick,increase service life.
◆ With the device of adjust the wind power.
◆ Can adjust wind power according to the sizes of papers.
◆ Ensure that no position offset.
5. Film transport:
◆ Film Transport is controlled by the servo motor.
◆ With high precision,make the error of cutting the film is less than 0.5mm.
◆ Adopt the touch screen to adjust the length of the film.
◆ Make the adjustment more convenient and efficient.
6. Roller knife:
◆ Quality alloy steel was adopted special heat treatment process to ensure long working hours.
◆ Use the touch screen to set the film length so that the machine can runs more accurate, stable and reliable.
7. Jog film cutting (Special for tissue boxes):
◆ Special design for the middle cutting of the film, such as tissue boxes point cut or long cut.
◆ Incision length is adjustable, ensure accurate and never shifting.
Operating conditions:
◆ Working temperature is 5ºC to 40ºC.
◆ Transportation and storage temperature is-25ºC to 55ºC.
>◆ The relative temperature is not greater than 60% (20%c), and the altitude is not
more than 1000 m.
Power supply specification:
◆ Total power: 3 phase 4 wire,380V 50HZ
◆ Control power: single phase,220V AC 24V DC
◆ Deviation: ±10%V ±1HZ
◆ Total power:10KW
Note：Due to the diversity of products, the applicability of the machine will be affected. So the above data is not applicable to every product.
1.Low voltage apparatus:
|
NO. |
NAME |
MODEL |
QTY |
NOTE |
|
1 |
Breaker |
DZ108-20 0.6-1A |
1 |
TANGANT |
|
2 |
Breaker |
DZ108-20 4-6.3A |
1 |
TANGANT |
|
3 |
Breaker |
DZ108-20 5-8A |
3 |
TANGANT |
|
4 |
Breaker |
DZ47-63-1PD 6A |
2 |
TANGANT |
|
5 |
AC Contactor |
LC1-D901 |
4 |
SCHNEIDER |
|
6 |
Button |
ZB2BA2+ZB101C |
14 |
SCHNEIDER |
|
7 |
Emergency Stop Switch |
ZB2BS54+BZ102C |
2 |
SCHNEIDER |
|
8 |
Switching Power |
ABL2REM24045H |
1 |
SCHNEIDER |
|
9 |
Cooling fan |
TA12025SL-2 AC220 |
2 |
|
|
10 |
Buzzer |
TBNAC220V-240VJBK5-400VA PUT IN |
1 |
TEND |
|
11 |
Speed Control Knob |
4.7KΩ |
1 |
|
|
12 |
Change-over Switch |
GLD11-63/04 |
1 |
TEND |
|
13 |
Photoelectric Switch |
E3ZD61 |
2 |
OMRON |
|
14 |
Encoder |
MT3806-2000B2-24T |
1 |
MT |
2.Frequency converter, PLC, Servo control:
|
NO. |
NAME |
MODEL |
QTY |
NOTE |
|
1 |
Frequency Converter |
VFDO 3.7EL43A |
1 |
DELTA |
|
2 |
Programmable Controller |
VS1-32MT |
1 |
VIGOR |
|
3 |
Servo Motor |
0.75KW |
1 |
WEIKEDA |
|
4 |
Servo Driver |
VEC-VC-R75H23B-M-C |
1 |
WEIKEDA |
|
5 |
Human Machine Interface |
MT4434T |
1 |
KINCO |
3 Motor configuration:
|
NO. |
NAME |
MODEL |
QTY |
NOTE |
| 1 |
Main motor |
VABPI00L-4 3.0KW |
1 |
DEDONG |
|
2 |
Vortex pump |
2LG5107AH362LG4107AH36 |
1 |
MEILAILE |
|
3 |
Pump |
ZFB80A |
1 |
TONGNENG |
|
4 |
Rubber roller motor |
90YS90GY38X 100GF6H |
1 |
JINGYAN |
4.Pneumatic component:
|
NO. |
NAME |
MODEL |
QTY |
NOTE |
|
1 |
Cylinder For Support Paper |
CQ2A32-10DM |
1 |
SMC |
|
2 |
Cylinder For Suction Plate. |
SDA25*10 |
2 |
SNS |
|
3 |
Rubber Roller Cylinder |
SDAJ25*15-15-B |
2 |
SNS |
|
4 |
Vibrating Motor |
GT-08 |
1 |
SNS |
|
5 |
Five-way Valve |
SY7120-5GD-02 |
1 |
SMC |